Probably one of your most prized possessions, power tool blades are an indispensable part of any worker’s toolkit - professional or hobbyist. They are versatile, quick and can accomplish a range of construction-based tasks. A true asset, we wholeheartedly agree.

The only problem is that just like other tools, these blades go through wear and tear as well and can lose their edge overtime. The result? A short lifespan.

But there’s no need to lose heart. You can actually extend the life of your Bosch power tool blades or any other brand that you prefer. There are tricks and tips to do so, which we’ll promptly discuss. Just keep reading!

How to keep your blades as sharp as new?

There are things you can do to prolong the life of your precious blades. Trust us, as one of the leading power tools suppliers in UAE, we can vouch for the fact that the tips below will help you maintain your blades in the best way possible so you don’t have to replace them frequently. Or at least sooner than you’d rather. Check these out:

Inspect your blades regularly

Your blades go through an intense workout every time they’re put to use. Sometimes, prolonged sessions can lead to chipping or dullness or even irregularities. If you check your blades regularly, you can catch any potential damage or problem early on and nip it in the bud. This way, you prevent any extensive damage to your precious Bosch power tool blades. We know you treasure them!

Select your blades carefully

Yes, of course buy the right blades from the right brand so they’re of good quality and automatically last long. But also use the right blade for the right job. You’ll likely be working with several different types of materials, and each material will require a specific type of blade to cut through it. If you use the wrong one, sure you’ll get the job done, but you might also end up breaking blades faster, thus reducing their shelf life.

Clean your blades

Since we are power tools suppliers in UAE, many customers ask us how to maintain their blades and we always give them this as advice because cleaning your blades is one of the best ways to increase their lifespan. Remove any residue thoroughly so it doesn’t wear your blades down eventually. Also, look up best cleaning practices for different types of blades. Your Bosch power tool’s blades might need different cleaning solutions depending on their type, so be sure to check that.

 

Lubricate them as well

Just cleaning is not enough. Take it from us, your blades need a little bit of extra care too in the form of lubrication. Lubricating your blades before use can help prevent friction as well as the buildup of excess heat during operation. Just make sure the lubricant you use is generally prescribed for the type of blade you have and that you follow the manufacturer’s instructions for application religiously. That should do it.

Sharpen your blades

The key to increasing the lifespan of your blades is to sharpen them regularly. Of course, apart from doing all of the above as well. That said, you must use high quality sharpening tools only. Poor quality ones might break your blades and that’s a consequence you don’t want to face. If you’re doubtful of your sharpening skills, you can always take your blades to professionals for a good sharpening session. Dull blades are bad for work and bad for the motor of your power tools so be sure to get your blades sharpened regularly.

Check your blade’s balance

You might need the help of your power tool for this. Attach your blade and check if the balance is fine. If you notice imbalance or unevenness, chances are your blade has worn off and will function in an imprecise fashion. The unfortunate thing is you can’t fix this. You’ll have to replace your blade. But the good thing is you’ll know what’s wrong so you can try and prevent it in the future.

Store your blades right

Your Bosch power tool’s blades need to be stored right too so they can last long. Which means you need to store them individually, and keep them in a dry, climate-controlled space so they don’t corrode or rust as easily. If there’s moisture where you’re storing them, rust is bound to follow. And if you store them together, the resultant friction might dull each of them. So don’t overlook the aspect of proper storage. It’s one of the most important ways to increase your blade’s life.

We’d also like to say that you should get your blades from reliable power tools suppliers in the UAE so you don’t end up with a cheap knock-off that gives up on you all too soon. After all, getting quality blades is equivalent to getting long-lasting blades.